Care And Cleaning - ReVent RVS90 Mode D'emploi

11.) Attach the SHIELD by squeezing the mounting springs together and inserting
the springs into the spring guides in the FAN.
FAN
spring guide
mounting springs

Care and Cleaning

WARNING: To reduce the risk of electric shock, fire, or injury to persons,
disconnect or turn off the breaker and lock the power supply at the panel to
prevent the power from being turned on before servicing or cleaning the unit.
1.) Remove the SHIELD by squeezing the springs and pulling down.
2.) Remove dust and dirt from the FAN with a vacuum cleaner.
3.) Dampen cloth with dish detergent. Wipe the FAN and dry with a cloth.
4.) Replace the SHIELD.
19
ceiling
TRIM RING
spring guide
SHIELD