Festo MH1- Serie Instructions D'utilisation page 16

2 Mounting
2.1 Mounting the soldering socket
• Drill the contact holes for the soldering sockets in your
printed circuit board. The dimensions for making the
contact holes are specified in the subsequent figure.
• Insert the soldering sockets into the printed circuit
board.
• Solder the contacts to the printed circuit board.
Dimensional drawing for soldering socket mounting
*
*)
± 0.1 mm
16
***
*
**)
± 0.05 mm
**
*
*
*
***)
+0.1 mm
Festo MH1...-PCB-Z6 1205b English
~1.5