Safety Rules And Precautions - INTEGRA Metering AMFLO SONIC Smart Instructions De Montage Et Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

1.3 Safety rules and precautions

The manufacturer accepts no responsibility if the following safety rules and precautions
are disregarded:
• Any modifications of the device implemented without the prior written consent of
the manufacturer will result in the immediate termination of product liability and
warranty.
• Installation, operation, maintenance and decommissioning of this device must be
carried out by trained, qualified specialists, authorised by the manufacturer, opera-
tor or owner of the facility. The specialist must have read and understood this en-
tire installation and operating manual and must follow the instructions contained
herein.
• Check the mains voltage and the information on the type plate before installing the
device.
• Check all connections, settings and technical specifications of any peripheral de-
vices.
• Open housing or parts of housing containing electric or electronic components
only when the electric power is turned off.
• Do not touch any electronic components (ESD sensitivity).
• Never exceed the specified classifications for mechanical load (e.g. pressure, tem-
perature, ingress protection (IP) etc.).
• Operate the system only in the specified environmental conditions and stated in-
stallation positions.
• Protect the system from overvoltage, e.g. by suitable fuses. In particular electric
welding at associated equipment must be prevented.
• Release the pressure in the pipe system and reduce the temperature of the me-
dium to a safe level for humans when carrying out any work involving the system's
mechanical components.
• None of the information contained in this manual or in any other documents shall
release planners, engineers, installers and operators from their own careful and
comprehensive assessment of the respective system configuration in terms of
functional capability and operational safety.
• The local labour and safety laws and regulations must be adhered to.
1.4 About the operating manual
The manufacturer reserves the right to make changes to technical data without prior notice.
The latest information and versions of this operating manual can be requested from your
local dealer.
WARNING
The manufacturer assumes no liability if the instructions and procedures de-
scribed in this manual are not followed!
20

Publicité

Table des Matières
loading

Table des Matières