Check The Operation Of The Loaded Camera; Confirm The Shooting Scene And Shooting Mode - Olympus PT-037 Mode D'emploi

Check the operation of the loaded camera.

After sealing the Case, check that the camera functions normally.
1 Push the POWER button on the Case and confirm that the camera
turns on/off.
2 Turn the mode dial knob on the rear of the Case and confirm that the
camera mode is switched properly.
• Check that the selected mode is displayed correctly on the LCD
monitor.
3 Press the shutter lever on the Case and confirm that the camera shutter
EN
releases.
• Also operate other control buttons on the Case and confirm that the
camera functions properly.
CAUTION:
If the camera does not function properly, reinstall the digital camera
following the procedures of "Check the digital camera." (P.19) of this manual.

Confirm the shooting scene and shooting mode.

When using the Case, the current camera shooting scene and shooting
mode can be confirmed on the camera's LCD monitor.
EN 24
Shooting scene/Shooting mode