Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
GB
never come in contact with the
mains connection. There is a risk
of electrocution.
Cleaning/Maintenance/
Storage
Clean and maintain your equipment regu-
larly. This will guarantee its performance
and long durability.
Ask our service centre to carry out
any work that is not described in
these instructions. Use only original
parts. This will prevent damage to
the equipment and any resulting per-
sonal injury.
Pull out the power plug before every
maintenance operation. There is a
risk of electrocution or of injury from
moving parts.
General cleaning instructions
•
In case of transport for utilization in
different locations, the pump must be
cleaned with clear water after every use.
•
In case of stationary installation, the
function of the float switch (
be checked regularly (at the latest every
three months).
•
With a water jet, remove fluff and
fibrous particles which are possibly pre-
sent in the pump casing.
•
Regularly remove sludge from the pit
base and also clean the shaft walls.
•
Clean precipitation from the float switch
with clear water.
•
In the case of a long period of non-use,
the pump must be thoroughly cleaned
after the last use and before the new
use, since difficulties in start-up can
arise due to precipitation and residues.
32
All manuals and user guides at all-guides.com
7) is to
Cleaning the Fan Wheel
In case of soiling or blockage of the impeller,
this can be cleaned via the pump outlet (3)
or by removing the floor plate (4):
1. Unscrew the bracket adapter
(
10) from the pump outlet
(
3).
2. Remove the 3 screws on the bot-
tom of the base (5) and take off
the base plate (4).
3. Clean the fan wheel using clean
water.
4. To re-assemble, reverse this order.
Any measures above and beyond these,
particularly opening the equipment, are to be
carried out by an electrician. In the case of
repairs, always contact our service centre.
Storage
•
Keep the equipment clean, dry and out
of the reach of children.
•
Unscrew the bracket adapter (
storage.
Waste Disposal/Environ-
mental Protection
Be environmentally friendly. Return the tool,
accessories and packaging to a recycling
centre when you have finished with them.
Do not dispose of electrical appli-
ances as unsorted municipal waste,
use separate collection facilities.
Hand over the device at an utilization loca-
tion. The plastic and metal parts employed
can be separated out and thus recycled use
can be implemented. Ask our Service-Center
for details. Defective units returned to us will
be disposed of for free.
10) for
Publicité
Table des Matières
Dépannage
