Electrical Safety - FLORABEST FTS 1100 C3 Traduction Du Mode D'emploi D'origine

All manuals and user guides at all-guides.com
of flammable liquids or gases. Non-
observance will result in a risk of fire or
explosion.
• Store the equipment in a dry place and
out of reach of children.
Caution! To avoid damage to the
equipment and any possible person
injury resulting from this:
• The transportation of aggressive, abra-
sive (grinding effect, e.g. sandwater),
corrosive, combustible (e.g. motor fuels)
or explosive liquids, salt water, cleaning
agents and foodstuffs is not permitted.
The temperature of the liquid being trans-
ported must not exceed 35 °C. Non-
observance can lead to device damage
and create a risk for the user.
• Do not work with damaged or incom-
plete equipment, or with equipment that
has been converted without the approval
of the manufacturer. Before initial opera-
tion, have a specialist check that the
required electrical protection measures
are in place.
• Monitor the equipment during opera-
tion (particularly in residential spaces,
in order to detect automatic switching
off or dry running of the pumps in time.
Regularly check the function of the float
switch (see chapter "initial operation").
Non-observance will invalidate all guar-
antee and liability claims.
• Please note that the pump is not suitable
for continuous operation (e.g. for wa-
tercourses in garden ponds). Check the
equipment regularly for correct function-
ing.
• Note that the lubricants used in the
equipment may cause damage or con-
tamination if they escape. Do not use the
pump in garden ponds with fish stocks
or valuable plants.
• Do not carry or fix the equipment by the
cable or pressure line.
• Protect the equipment from frost and
from running dry.
• Use only original accessories and do not
carry out conversion work on the equip-
ment.
• Please read the notes in the operating
instructions on the topic of "maintenance
and cleaning". Any measures above and
beyond these, particularly opening the
equipment, are to be carried out by an
electrician. In the case of repairs, always
contact our service centre.

Electrical safety:

Caution: to avoid accidents and inju-
ries from electric shocks:
• The equipment is not to be operated if
there are people in the water. There is a
risk of electric shock.
• After erection, the mains plug must be
freely accessible when the equipment is
in operation.
• Before operating your new pump, have
a specialist check:
- The earthing, the protective multiple
earthing; the residual current circuit
breaking must be compliant with the
safety regulations of the energy supply
company and function without fault,
- The protection of the electrical plug
connections from the wet.
- If there is a risk of flooding, fix the
plug connections in an area that is
safe from flooding.
• Ensure that the mains voltage matches
the specifications on the rating plate.
• The electrical installation shall be accord-
ing to national wiring rules.
• Connect the appliance to a power sock-
et with a residual current circuit breaker
GB
29