Problem Solving - Eureka NEU520 Serie Mode D'emploi

Problem solving

Make sure vacuum is turned off and power cord is unplugged.
N O T I C E : Thermal cut-off
This vacuum cleaner has a special thermostat that protects the vacuum in case of motor
overheating. If the vacuum suddenly shuts off, proceed as follows: 1) Push the power switch
to off and unplug the vacuum. 2) Check the vacuum for a possible source of overheating such
as a full dust cup, blocked hose or clogged filter. If these conditions are found, fix them and
wait at least 30 minutes before attempting to use the vacuum. 3) After the 30 minute period,
plug the vacuum back in and turn on the switch. If the vacuum still does not work, call the
Eureka customer service helpline
.
14
Eureka Customer Service HELPLINE 1-800-282-2886