How To Replace Hepa Filter - Eureka NEU520 Serie Mode D'emploi

Caution: Make sure vacuum cleaner is turned off and power cord is unplugged.
Step on floor nozzle and lay vacuum flat
for easy access to filter. Press latch and lift
off exhaust grill.
Install HEPA filter: Align tabs at front edge
and press into position.
Warning: Never operate vacuum cleaner without all filters,

How to replace HEPA filter

HEPA filter – Replace or wash every year
filter screen, and dust cup in proper position.
Press tab and grasp edges to lift out HEPA
filter. Note: All filters are washable and can be
cleaned by rinsing with warm water. Be sure
the filter is THOROUGHLY dry before installing.
Insert front edge of exhaust grill between
two tabs; press to close.
24h
11
www.eureka.com