How To Maintain Dust Cup And Filters - Eureka NEU520 Serie Mode D'emploi

How to maintain dust cup and filters

CAUTION
Never operate vacuum
cleaner without pre-motor
filter, filter screen and dust
cup in proper position.
WARNING: Moving parts!
Make sure vacuum
cleaner is turned off and
power cord is unplugged.
Pull dust cup latch to lift
up dust cup lid.
Align tab on filter screen with
slot on front of dust cup and
drop into position. Rotate
handle down into position.
10
Eureka Customer Service HELPLINE 1-800-282-2886
Press release button
and lift off dust cup.
Washable dust cup filters –
Lift out pre-motor filter and shake
off dust frequently. Every three
months, rinse filter and dry
THOROUGHLY.
Reinstall pre-motor filter.
Dust cup – Empty after each use
Hold dust cup over
wastebasket and
press lever to
release bottom lid.
Debris will empty.
Clean frequently
24h
Rotate handle up to lift out filter
screen. Tap to remove dust.
Rinse dust cup and filter
screen; dry THOROUGHLY.
Close bottom lid
until it clicks.
Close cover until it clicks.
Click
Click