How To Maintain Your Vacuum Cleaner - Eureka NEN200 Série Guide Du Propriétaire

How to maintain your vacuum cleaner

Open
Remove
Step 1: Changing the dust bag:
When the dust bag full indicator turns red,
it is time to replace the existing bag with a
new one. Open the dust bag compartment
by lifting the cover and remove the old dust
bag, insert the new dust bag and snap it
in place.
Step 2: Replacing the filter:
1. Open the dust bag compartment by lifting
the cover.
2. Pull out the filter bracket assembly.
3. Separate the filter from the bracket
assembly
!
CAUTION: Unplug from electrical outlet
before maintenance.
4. Rinse the filter in lukewarm water and
allow it to dry. Never wash the filter in a
washing machine. Do not use a hair
dryer or similar device to dry it.
5. Reinsert the clean filter when it is
completely dry. You may also replace the
filter with a new one.
Step 3: Replacing the (HEPA) exhaust filter:
1. Remove the exhaust filter door.
2. Remove the current filter from the holder
and insert a new one.
3. Close the filter door.
www.eureka.com
7