Table des Matières
Publicité
H
F
G
I
B
B
B
6
L
E
D
J
A
K
C
C
D
J
A
FIG. 1
ENGLISH
C
PARTS LIST
A
Body
B
Floor nozzle
C
Upper handle
D
Lower handle
E
Power switch
F
Dust cup latch
G
Dust cup
H
Filter assembly
I
Stair cleaning hand grip
J
Handle button
K
Electrical cord
L
Quick cord release
HOW TO ASSEMBLE
CAUTION: Assemble the cleaner completely before plugging
into an electrical outlet. Make sure switch is in the
Off position.
Attach Floor Nozzle
Step 1: Align the lock button on the floor nozzle neck
hole in the receiving tube on the main body
Step 2: Slide the floor nozzle
clicks into place.
Step 3: Push the lock button in and pull on the floor nozzle
remove it from the main body
Attach Handle
Step 1: Align flat side of upper handle
handle
Step 2: Line the handle assembly
in the top of the body
should face forward.
Step 3: Push handle assembly
pressing the handle button
Handle will click into place.
Step 4: There are two handle positions available: Handle all the
way up and handle all the way down. Handle button
needs to be depressed to raise and lower the handle
assembly
(Fig. 1)
B
into the main body
A
.
(Fig. 1)
C
with flat side of lower
D
and press together.
C
D
and
A
. Flat side of handle and loop
C
and
D
down into body while
J
on back of the body
C
and
D
.
B
with the
A
.
A
until it
B
to
up with the hole
A
.
J
Publicité
Table des Matières
