Troubleshooter's Checklist; Warranty - Terrier FBK Mode D'emploi

10

TROUBLESHOOTER'S CHECKLIST

Failure/malfunction
Load slipping
Body bent
Lifting shackle oval shape
Spring defective
Shackle pins bent
Retaining pins missing
Clamp difficult to open/close Key way slot dirty
11

WARRANTY

Terrier Lifting Clamps provides a 5 year warranty on its lifting clamps. This warranty is ap-
plicable to the original end user of the lifting clamps. Only if the clamp has been inspected,
checked and maintained by this instructions and by an official dealer. This warranty period
of 5 years is valid from the day of purchase, and is liable to all conditions and measurements
stated in this document.
11a CONDITIONS
This warranty only covers failures in the lifting tools which is the consequence of production
errors which occur during normal use. The warranty covers no wear to components such as
pivots, cam assemblies, lock springs etc. Should there be any kind of failure within this guar-
antee period, the lifting tool will be replaced or repaired to insight of the producer.
No warranty is given to clamps due to the following failures:
- Regular wear.
- Overload.
- Wrong and/or carelessly use.
- Damages.
- Not following procedures and measures.
- Hoisting differing material other then indicated on clamp or stated in the user-manual.
- Adapting and/or modifying of the Terrier clamp.
- The injudicious use of the clamp, and not succeeding all indications which are stated in
the users manual.
- When maintenance and/or revision has not been carried out by an authorised Terrier
distributor.
The producer is not responsible for incidental damage or damage due to wrong use of the
lifting tools as well as from violation of this manual.
Possible Cause
Load dirty
Pivot and/or cam dirty
Pivot and/or cam blunt
Jaws bent open
Clamp overloaded
Clamp overloaded
Spring worn out
Clamp overloaded
Incorrectly assembled
Clamp worn out
Clamp contaminated
Clamp overloaded
Action
Clean load
Clean clamp
Overhaul clamp
Reject clamp
Reject clamp
Reject clamp
Overhaul clamp
Reject clamp
Fit new retaining pins
Clean clamp
Reject clamp
Clean clamp
Reject clamp
15