Part Names - Panasonic CZ-RTC6BL Mode D'emploi

Masquer les pouces Voir aussi pour CZ-RTC6BL:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 8
[General precautions for ECONAVI]
WARNING
• Do not use the ECONAVI function in a room with disabled persons or infants only. Due to their limited motions, the ECONAVI
sensor may judge no person is present, causing the indoor unit to stop the operation.
[General precautions for Bluetooth
WARNING
• Do not use the remote controller where pacemaker users may be around. If used, turn off Bluetooth
– Bluetooth
functionality may cause pacemakers to malfunction and lead to an accident.
®
• Do not use the remote controller near electrical medical devices. If used, turn off Bluetooth
– Bluetooth
®
functionality may cause these devices to malfunction and lead to an accident.
• Do not use the remote controller near automatic doors, fire alarms, or other automatically controlled devices. If used, turn off
Bluetooth
®
functionality.
– Bluetooth
®
functionality may cause these devices to malfunction and lead to an accident.
CAUTION
• This product is permitted for use only in the country where it was purchased.
• This product uses signals in the 2.4 GHz band.
– Signals in the 2.4 GHz band are used by medical devices, other similar devices, and nonlicensed amateur radio stations
(hereafter referred to as other radio stations).
1. Before using this product, make sure there are no other radio stations in the vicinity.
2. If a radio interference occurs between this product and other radio stations, move the product or stop using the product (turn
off Bluetooth
®
functionality).
3. If problems with radio interference occur, consult the dealer from which the product was purchased.
• Keep an appropriate distance between the product and radio-emitting devices, such as cordless phones, microwave ovens, and
wireless LANs, to prevent Bluetooth
• The following actions may be punishable by law.
– Disassembling or alteration of this product
– Removal of certification labels
• The maximum line-of-sight distance of this product is 10 meters. This distance will be shorter when obstacles or people are in the
path of radio waves or radio interference from appliances (e.g., microwave ovens) exists.
[Precautions for using mobile device application]
• When operating an air conditioner from a remote controller located outside the visibility of the air conditioner, make sure that the
operation of the air conditioner will not negatively affect its surroundings or the occupants beforehand.
• When occupants include children, elderly people, people with ailments, or people with disabilities, make sure the product is used in
the presence of a capable, supervising adult.
• When one or more people are in a room with an air conditioner, let them know beforehand that the air conditioner is going to be
operated from a remote controller located outside the visibility of the air conditioner.
• Children should be supervised or instructed to stay away from the product.
• Poor radio-wave conditions due to an existence of obstacles or radio-emitting devices, such as a microwave oven, in the vicinity of
the product can lead to a non-response error. Periodically check the operating conditions of the product.
• Regarding Bluetooth
®
functionality, the maximum line-of-sight distance of this product is 10 meters. Obstacles in the path of radio waves can
shorten this distance. If a problem occurs, remove the obstacles or shorten the distance between this product and the connected device.
• It is recommended to lock the mobile device screen to prevent inadvertent operation of the air-conditioning system.

Part names

Control panel / Top screen
„When stopped
Up/Down buttons
Selects an item.
Menu button
• When pressed repeatedly during operation, this shows operating status confirmation, set temperature, operation mode, fan speed,
flap, and the menu screen.
• When pressed while stopped, the menu screen is displayed.
Note
Press centre
4
®
functionality]
®
interference from these devices that can affect normal operation and performance of the product.
Under operation
of nanoe™ X
LCD screen
Start/Stop button
Starts/Stops operation.
Enter button
Fixes the selected content.
No glove
®
®
functionality.
„When operating
Set temperature
Operation mode
functionality.
Appears when
ECONAVI is being set
to ON.
Connected with
a mobile device
via Bluetooth
®
functionality (P.6)
No pen

Publicité

Table des Matières
loading

Table des Matières