auna Pureness Mode D'emploi page 24

EN
24
the rest and then turn off the power to stop the turntable from spinning.
• Users should not change to a ceramic cartridge system, otherwise unit
can´t be connected anymore to an Aux-in of music-centre
Adjustments
Platter speed fine adjustment
• During playback of record, turn the Pitch Adjustment (3) to fine adjust
the platter rotation speed.
• Turning clockwise (+) will increase the turning speed and anti-clockwise
will slow down the speed.
• Turn the Pitch Adjustment until the output sound performance is up to
your satisfaction
Tone arm stopping position alignment
The position of the tone arm complete playback and return to the rest
station can be adjusted at the alignment screw (#15 for 30 cm vinyl; #16 for
17cm vinyl).
Line out connection
You can connect the system to your own Hi-Fi system by connecting the line
out socket (14) to the auxiliary input socket with a RCA cable.
If set the Phono / Line selector (12) at EQ ON position, the output signal will
pass through the system's built-in pre-amplifier circuit. If set the selector (12)
at Phono Thru, the output signal will come directly from the cartridge and
without amplified.