Sony SU-WL450 Informations D'installation page 10

5
Drill pilot holes on the marks.
Make sure the location on the wall to drill
the holes are strong enough to support a
weight of at least four times that of the TV
or LCD Monitor.
Dry wall with studs
Note
 Pilot holes must be drilled to a depth of 75 mm, using
a 5.5 mm diameter drill bit.
Solid Concrete or Concrete Block
75 mm
5.5 mm
Stud or Reinforcement
75 mm
10 mm
6
Install the Base (20)  on the
wall using suitable screws (not
supplied).
Note
 Use four or more screws of 8 mm diameter or equivalent
(not supplied).
 Use a level to check whether the Base (20)  is level.
 Fit four screws to the holes of Base Adaptor  with
Base (20)  (2-a only).
2-a

2-b

− 10 (GB) −
