After-Sales Service And Application Service - Bosch PFS 1000 Notice Originale

Masquer les pouces Voir aussi pour PFS 1000:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 23
22 | English
Problem
Spray material dripping at the
nozzle cap
No spray material coming out of the
nozzle cap

After-sales Service and Application Service

In all correspondence and spare parts orders, please always
include the 10-digit article number given on the type plate of
the fine-spray system.
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0844) 7360109
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
2 609 007 770 | (16.9.14)
All manuals and user guides at all-guides.com
Cause
Deposit of spray material on the nozzle cap
9/8, the nozzle needle 13 and the air cap 2
Nozzle cap 9/8 loose
Suction tube 12 loose
Nozzle needle 13 clogged
Suction tube 12 clogged
Ventilation hole 15 on suction tube 12
clogged
Container seal 14 missing or damaged
Spray material too viscous
Spray material dirty (lumps of paint)
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
E-Mail: bsctools@icon.co.za
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: (031) 7012120
Fax: (031) 7012446
E-Mail: bsc.dur@za.bosch.com
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Milnerton
Tel.: (021) 5512577
Fax: (021) 5513223
E-Mail: bsc@zsd.co.za
Bosch Headquarters
Midrand, Gauteng
Tel.: (011) 6519600
Fax: (011) 6519880
E-Mail: rbsa-hq.pts@za.bosch.com
Corrective Measure
Clean the nozzle cap, nozzle needle and air
cap
Tighten the nozzle cap 9/8
Slide the suction tube all the way onto the
paint channel 16
Clean nozzle needle
Clean suction tube
Clean the suction tube and the ventilation
hole
Slide a (new) container seal over the suction
tube into the groove
Dilute the spray material again and carry out
a test-spray run
Completely empty and clean the spray gun;
pour the spray material through the filling
sieve when filling
Bosch Power Tools

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Pfs 2000

Table des Matières