Attention For Camera Installation - Reolink Argus 2 Mode D'emploi

Attention for Camera Installation

• PIR Sensor Detecting Distance
The PIR senor has 3 sensitivity levels for your adjustment: Low/Mid/High.
Higher sensitivity offers longer detecting distance. The default sensitivity of the PIR sensor is at
"Mid".
Detecting Distance
Sensitivity
(For moving and living things)
Low Up to 4 meters (13ft)
Mid Up to 6 meters (20ft)
High Up to 9 meters (30ft)
NOTICE:
1. Path for adjusting distance in App: Device settings-PIR settings
2. Path for adjusting distance in Client: Device settings-RF Alarm
3. Higher sensitivity offers longer detecting distance, but it would lead to more false alarms. You
are advised to set up the sensitivity level to "Low" or "Mid" when you install the camera outdoors.
8 English
Detecting Distance
(For moving vehicles)
Up to 10 meters (33ft)
Up to 12 meters (40ft)
Up to 15 meters (50ft)
Important Notes for Reducing
!
False Alarms
To reduce false alarms, please note that:
• Do not install the camera facing any objects with bright lights, including
sunshine, bright lamp lights, etc.
• Do not place the camera too close to a place where there are frequently
moving vehicles. Based on our numerous tests, the recommended distance
between the camera and the vehicle is 15 meters (50ft).
• Stay away from the outlets, including the air conditioner vents, humidifier
outlets, the heat transfer vents of projectors, etc.
• Do not install the camera where there are strong winds.
• Do not install the camera facing the mirror.
• Keep the camera at least 1 meter away from any wireless devices,
including Wi-Fi routers and phones in order to avoid wireless interference.
English 9