Camera Introduction; Set Up The Camera - Reolink Argus PT Instructions

Camera Introduction

Speaker
Status LED
Lens
Daylight Sensor
Built-in PIR Sensor
Built-in Mic
Reset Hole
*Press the reset button with a pin to restore
camera to factory settings.
Micro SD Card Slot
*Rotate the camera's lens to find the reset
hole and the SD card slot.
Battery Status LED
Micro USB Port
Antenna
Power Switch
Different states of the status LED:
Red Light: WiFi connection failed
Blue Light: WiFi connection succeeded
3 English
Blinking: Standby status
On: Working status

Set up the Camera

1. Install the antenna and power the camera on.
2. Download and launch the Reolink App or Client software and follow the on-screen instructions
to finish setup.
• On Smartphone
Scan to download the Reolink App.
Available on the
• On PC
Download path of the Reolink Client: Go to https://reolink.com > Support > App & Client.
English 4