Lifetime POWER LIFT 90878 Instructions De Montage page 30

Table des Matières

Publicité

SECTION 5 (CONTINUED) /
TOOLS AND HARDWARE REQUIRED /
1/2" (13 mm)
(x2)
• If you have trouble with this section, scan the code below to view a video on on its assembly.
• Si vous avez des problèmes avec cette section, scannez le code QR en dessous pour voir un vidéo de l'assemblage.
• Si tiene problemas con esta sección, escanee el código QR debajo para ver un video del ensamble.
5.1
• Slide the Gas Spring Cover (AKG)
onto the Gas Spring (AKF) as
shown.
• Glissez le couvercle du piston à
gaz (AKG) sur piston à gaz (AKF)
comme illustré.
• Deslice la cubierta del
amortiguador de gas (AKG) sobre
el amortiguador de gas (AKF)
como se muestra.
AKG
SECTION 5 (SUITE)
/ SECCIÓN 5 (CONTINUACIÓN)
OUTILS ET QUINCAILLERIE REQUIS
ACX (x1)
5.2
!
AKF
/
HERRAMIENTAS Y HERRAJE REQUERIDOS
• http://go.lifetime.com/rigidwidepowerlifthandle
• Align the holes in the Gas Spring Cover (AKG) and the Gas Spring (AKF) with
the holes in the Pole Bracket (ALL), and attach the Gas Spring assembly
to the Pole Bracket with the hardware shown.
• Alignez les trous dans le couvercle du piston à gaz (AKG) et le piston
à gaz (AKF) avec ceux dans le support du poteau (ALL), et attachez
l'ensemble du piston à gaz au support du poteau en utilisant la
quincaillerie illustrée.
• Alinee los agujeros en la cubierta del amortiguador de gas (AKG) y el
amortiguador de gas (AKF) con ellos en el soporte del poste (ALL), y
sujete el ensamble del amortiguador de gas al soporte del poste
usando el herraje indicado.
• Tighten the Centerlock Nut (BSG) until it is fl ush
with the end of the Bolt.
• Serrez l'écrou de blocage central (BSG) jusqu'à ce
qu'il soit au ras de l'extrémité du boulon.
• Apriete la tuerca de bloqueo central (BSG) hasta
que esté a ras del extremo del perno.
• A Centerlock Nut will require
some effort to thread onto a
Bolt. See page 4 for details.
• Des efforts sont nécessaires
pour serrer un écrou de blocage
central sur le boulon. Voyez la
page 4 pour plus de détails.
• Se requiere un poco esfuerza
para apretar una tuerca de
bloqueo central en el perno. Vea
la página 4 para ver más detalles.
26
BSG (x1)
ALL
BSG
ACX

Publicité

Table des Matières
loading

Table des Matières