Manual: Laserworld Proline Series
Channel
10 - zoom
11 - X rotation
12 - Y rotation
13 - Z rotation
14 - drawing
15 - Y wave
16 - X wave
Attention! The following channel only work if the laser is in static DMX mode (Channel 1 at value 150 - 199)!
2 - pattern selection
Please note that not each pattern can be combined with each effect.
To use the grating effects in ILDA mode, additional DMX control is necessary.
page 10 / 42
Value
0 - 10
11 - 87
88 - 150
151 - 200
201 - 255
0 - 128
129 - 255
0 - 128
129 - 255
0 - 128
129 - 192
193 - 255
0 - 74
75 - 104
105 - 144
145 - 184
185 - 255
0 - 10
11 - 69
70 - 129
130 - 189
190 - 255
0 - 10
11 - 69
70 - 129
130 - 189
190 - 255
0 - 255
Function
no zoom
manual zoom
automatic zoom in with increasing speed
automatic zoom out with increasing speed
automatic zoom in and out (in turns)
manual positioning
automatic movement
manual positioning
automatic movement
manual positioning
anticlockwise movement with increasing speed
clockwise movement with increasing speed
manual drawing
automatic drawing with increasing speed
automatic reduction with increasing speed
automatic drawing and reduction with increa-
sing speed
automatic two-sided reduction
no effect
small wave effect with increasing speed
medium wave effect with increasing speed
large wave effect with increasing speed
wave effect II
no effect
small wave effect with increasing speed
medium wave effect with increasing speed
large wave effect with increasing speed
wave effect II
pattern selection