Toro Flex-Force Power System 60V Mode D'emploi page 10

Operation
WARNING
The blower can throw debris, possibly
causing serious personal injury to you or
bystanders.
• Do not blow hard objects, such as nails or
bolts.
• Do not operate the blower near bystanders
or pets.
• Be careful of blowing direction (i.e.,
blow away from bystanders, windows,
automobiles, etc.). Only use as much
speed as required.
• Use extra care when cleaning debris from
stairs or other tight areas.
• Wear safety goggles or other suitable eye
protection, long pants, and shoes.
Starting the Blower
1. Make sure that the vents on the blower are clear
of any dust and debris.
2. Align the cavity on the battery pack with the
tongue in the handle housing
3. Grasp the handle and push the battery pack into
the handle until the latch locks into place
2).
1. Battery latch
4. To start the blower, squeeze the variable-speed
trigger (Figure 6).
Note:
Engage the speed lock to keep the
machine on without pressing the variable-speed
trigger (Figure 6).
All manuals and user guides at all-guides.com
(Figure 5).
Figure 5
1. Speed lock
2. Turbo boost button
3. Variable-speed trigger
(Figure
g273146
8
Figure 6
4. Battery latch
5. Blower venting areas
g267241