Dandy DPA100B9IWDB-6 Manuel Du Propriétaire page 22

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

OPERATING INSTRUCTIONS
TIMER
Auto Off
1. When the air conditioner is turned on, press the
timer button to activate the auto off timer.
2. Press the temperature control buttons to change
the set time in 0.5 hour increments up to 10
hours and then in 1 hour increments up to 24
hours.
Auto On
1. When the air conditioner is turned off, press the
timer button to activate the auto on timer.
2. Press the temperature control buttons to change
the set time in 0.5 hour increments up to 10
hours and then in 1 hour increments up to 24
hours.
The timer will not cycle the air conditioner on and
off indefi nitely. The auto on and auto off timers will
function one time and then the air conditioner will
return to regular functioning.
When setting the timer, the display will revert back
to showing the temperature if there is no input
within 5 seconds.
Turn the air conditioner off, set the timer to 0 or
press and hold the timer button for 3 seconds to turn
off the timer.
SLEEP
The sleep feature can be used to conserve energy
during sleeping hours. This feature can be used
during cool and heat mode. It is not available in dry
or fan mode.
The temperature will increase by 1 degree every
30 minutes for 1 hour. The unit will hold the new
temperature for 7 hours.
The sleep feature can be canceled at any time by
pressing the sleep button.
FOLLOW ME
There is a temperature sensor built into the remote
control that will continuously collect the current
room temperature. Keep the remote control with
you and the appliance will automatically adjust the
set temperature based on the current temperature
where you are located to reach the most
comfortable condition and temperature.
Press the follow me button to activate the follow me
function. The remote will send a signal to the air
conditioner every 3 minutes, so long as you remain
within range of the appliance.
If the appliance does not receive a signal from the
remote during any 7 minute interval, it will beep to
indicate that the follow me mode has ended.
The maximum distance for the follow me feature is
8 meters (26 feet). This feature is available in cool
and auto modes.
21

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Dpa120b9iwdb-6Dpa120b9ibdb-6

Table des Matières