EN
42
Encoding a cassette
•
Connect a USB memory with sufficient free space.
•
Select the „Tape" function (6) and then press „Record" (3) immediately.
•
The LCD display (2) will flash „USB" and then during encoding
.
•
Start playback of the desired cassette titles.
•
To stop, press „Record" (3), the display will stop flashing and show
„Tape".
Encoding bit rate (via remote control)
You can set the bitrate according to your wishes regarding quality and
storage space. The range is 32/64/96/128/192/256 kbps.
•
Select „Phono" (6) and remain in stop mode.
•
Press „Info" and the LCD display (2) will show the standard bit rate (128
kbps).
•
Set the bit rate with (13,24).
•
Press „Info" again to confirm and the display will show „Phono" again.