Levoit LV600HH Mode D'emploi page 11

Press the Warm Mist button to
turn on the heating function on
the humidifier. There are three
heat settings to choose from:
Icon Setting
Low heat. Warm
Mist function has
been turned on.
Medium heat.
High heat.
None
Mist function.
NOTE:
• Use caution when setting the warm mist
While the humidifier is operating, the
display will automatically dim itself after 30
press and hold the AUTO button for 3
seconds or press "Display" button once on
the remote control.To turn the display back on,
press any button (except the power button) on
the control panel.
Action
Press once.
Press a
second time.
Press a
third time.
Press a
fourth time.
11
Press the AUTO button
to activate the automatic
humidifying mode. The unit
cool mist based on the
surrounding environment and
will maintain environmental
humidity from 55-68% RH (the
unit will run continuously if the
humidity is below 54% RH and
will stop when it reaches 68%
RH). The table below shows
the mist level in correlation to
the relative humidity level for
Auto Mode.
Relative Humidity
< 60% RH
60%-63% RH
64%-67% RH
> 68%RH automatically shuts
NOTE:
• Changing the mist level while on AUTO mode
will cancel the AUTO mode function.
Mist Level
Mist level 3
Mist level 2
Mist level 1
Humidifier
EN