Setting Up (Or Changing) The Display Size - JVC DLA-M5000LE Manuel D'instructions

Operating the Main Menu

Setting Up (or Changing) the Display Size

I Remote control unit
QUICK
ALIGN.
OPERATE
AV HIDE
PRESET PAGE BACK
AV RGB/COMPUTER
+
U T
SHIFT ZOOM FOCUS
–
D W
LENS
I Main menu
R G B 1
P I X E L C L O C K
P O S I T I O N
P I C T U R E
O P T I O N S
S O U R C E
C H A N N E L
U S E R S O U R C E S E T U P
D I S P L A Y S I Z E
D E C O D E R
L A N G U A G E
Submenu item [DISPLAY SIZE]
Note
• The selected item is shown in magenta color. Items shown
in gray color cannot be operated or set in the current mode.
56
PAGE BACK button
MENU/ENTER button
A U T O
S X G A 1
A U T O ( )
E N G L I S H
If the display size (horizontal effective dots and vertical
effective lines of PC video boards, etc.) of an input signal
(source) registered in the user source setup does not match
the display size projected by this projector, this setup should
be performed.
In the user source setup, a display size most approximate to
the standard setting of the projector is automatically
assumed. If this setting is different from the display size of
the signal actually being input, display size setup becomes
necessary.
Notes
• Display size setup cannot be performed for signals of
NTSC (480i), 480p, PAL, HDTV (1035i/1080i) or 720p.
• Do not perform display size setup if the display size of the
equipment that is feeding input signal is not known.
• This function is not meant for enlarging or reducing the
screen size.
1
Press the MENU/ENTER button.
• The main menu appears on the screen.
2
Press MENU/ENTER toward the 5 or ∞
mark to select a submenu item,
"DISPLAY SIZE".
• The selected item (text display) is shown in magenta
color.
3
Press the MENU/ENTER button to set.
• A submenu item, "DISPLAY SIZE adjustment menu"
appears on the screen.
H P I X E L
V P I X E L
H C E N T E R
V C E N T E R
(DISPLAY SIZE adjustment menu)
4 Press MENU/ENTER toward the 5 or ∞
mark to select "H PIXEL", then press
MENU/ENTER toward the 2 or 3 mark
to set the number of horizontal pixels.
• The selected item (text display) is shown in magenta
color.
5 Press MENU/ENTER toward the 5 or ∞
mark to select "V PIXEL", then press
MENU/ENTER toward the 2 or 3 mark
to set the number of vertical pixels.
6
Press PAGE BACK twice.
• The menu disappears.
(To be continued on the next page)
D I S P L A Y S I Z E
( U S E R 1 )
1 1 5 2
8 7 0
6 0
2 4