Changing (Setting) The Source - JVC DLA-M5000LE Manuel D'instructions

Changing (Setting) the Source

I Remote control unit
QUICK
ALIGN. OPERATE
AV HIDE
PRESET PAGE BACK
AV RGB/COMPUTER
+
U T
SHIFT ZOOM FOCUS
–
D W
LENS
I Main menu
Y P B P R
P I X E L C L O C K
P O S I T I O N
P I C T U R E
O P T I O N S
S O U R C E
C H A N N E L
U S E R S O U R C E S E T U P
D I S P L A Y S I Z E
D E C O D E R
L A N G U A G E
Submenu item [SOURCE]
Notes
• The selected item is shown in magenta color. Items shown
in gray color cannot be operated or set in the current mode.
• Items that can be set are different when video signals are
input and when computer signals are input.
• For dedicated source signals (corresponding frequency,
etc.) for computer signals, see page 18.
PAGE BACK button
MENU/ENTER button
C H : 1
H D T V ( 1 0 8 0 i )
N T S C ( 4 8 0 i )
E N G L I S H
Normally, use the source setting in AUTO. If use in AUTO is
unstable such as color not appearing, the screen being
disturbed or the screen being intermitted, set to the
dedicated source (forced mode) in accordance with the input
signal.
Also, USER mode, which is a user-dedicated source, is
available.
• When shipped from the factory, the source settings are as
follows:
Factory
Input mode
setting
VIDEO PAL/SECAM
Y/C PAL/SECAM
YPBPR AUTO
Notes
• Depending on the signal from a device connected,
adjustment may be needed after a dedicated source is set.
If that is the case, adjust the appropriate items.
• When the input mode (SOURCE) is VIDEO or Y/C, and if
AUTO is set, the automatic detecting function may work,
possibly causing the screen to be intermitted or disturbed.
In that case, set to a dedicated source (forced mode).
• When special effect playback (fast-forward/twice-speed/
triple-speed) is performed on a video deck, etc., the picture
may be disturbed or intermitted, depending on the device.
• When inputting 480p or 720p-DTV-format signal in RGB 2
input mode, use the dedicated source cannot be detected.
1
Press the MENU/ENTER button.
• The main menu appears on the screen.
2 Press MENU/ENTER toward the 5 or ∞
mark to select "SOURCE".
• The selected item (displayed in text) is shown in
magenta color.
3
Press the MENU/ENTER button.
• The submenu items, SOURCE menu, appears on the
screen.
S O U R C E
( H D T V ( 1 0 8 0 i ) )
S V G A 1
A U T O
S V G A 2
N T S C ( 4 8 0 i )
M A C 1 6
S D T V ( 4 8 0 p )
X G A 1
H D T V ( 7 2 0 p )
X G A 2
H D T V ( 1 0 8 0 i )
M A C 1 9
P A L / S E C A M
M A C 2 1
P C - 9 8
S X G A 1
V G A 1
S X G A 2
V G A 3
S X G A 3
M A C 1 3
U S E R
V G A V E S A
(SOURCE menu)
4 Press MENU/ENTER toward the 2, 3,
5 or ∞ mark to select a source from the
"SOURCE" items.
• The selected item (text display) is shown in magenta
color.
(To be continued on the next page)
Operating the Main Menu
Factory
Input mode
setting
RGB 1 AUTO
RGB 2 AUTO
— —
The display in ( )
shows the
currently set
status.
43