Adjust Focus; For Operating Other Functions - JVC DLA-M5000LE Manuel D'instructions

Basic Operations
I Projector's buttons
EMERGENCY AV RGB
I Remote control unit
LENS LOCK j UNLOCK switch
QUICK
ALIGN. OPERATE
AV HIDE
PRESET PAGE BACK
AV RGB/COMPUTER
+
U T
SHIFT ZOOM FOCUS
–
D W
LENS
26
SETTING QUICK
ALIGN.
QUICK ALIGN. button
QUICK ALIGN. button
FOCUS (+/–) buttons

4. Adjust focus

I Adjust focus with the remote control's
FOCUS (+/–) buttons.
When adjusting the focus with the FOCUS buttons, set
the LENS LOCK j UNLOCK switch to the UNLOCK
position.
Remote control unit
FOCUS
Note
• Focus adjustment can also be made on the setting menu.
For operating the setting menu, refer to "Making Basic
Settings" on page 29.

For Operating Other Functions

I To use the quick alignment function
The quick alignment function is used to automatically
adjust (set) the screen settings of "TRACKING, PHASE,
H. POS. and V. POS." of computer system input video.
• Use either the remote control's or projector's button.
When using the remote control unit:
Press the QUICK ALIGN. button.
When using the projector:
Clear the menu display, and press the projector's QUICK
+ " and "- - " buttons at the same time.
+ + - -
ALIGN. "+
* During the automatic adjustment, "QUICK-ALIGNMENT"
(Quick-Alignment) appears on the screen and
disappears automatically after the adjustment is
completed.
Remote control unit
QUICK
ALIGN.
Screen display
Q U I C K - A L I G N M E N T
Note
• This function works only for computer system inputs.
CAUTION
• When performing automatic adjustment using the
quick alignment function:
Use a bright, still-picture screen. It may not function
correctly on a dark or motion-picture screen.
If the condition adjusted by using the quick alignment
function is not good, manually adjust TRACKING, PHASE,
H. POS. and V. POS. (see pages 29, 35 and 36).
+
–
Projector
QUICK
ALIGN.