Accessories - Bosch FNH180K-16 Consignes De Fonctionnement/Sécurité

BM 2610034445 03-14_FNH180 3/27/14 11:52 AM Page 15
No-Mar Tip
The No-Mar Tip on the nose of the work
contact element protects the work piece from
unintentional marring from bare metal wire
nose when compressed during actuation. The
tip can be removed and replaced.
Disconnect the battery pack
W RNING
from the tool and remove
nail strips before removing or replacing no-
mar tips. Such precautionary safety measures
reduce the risk or unintentional tool operation.
To remove the tip: Pull the no mar tip towards
the back of the tool following the bend of the
wire nose.
To replace the tip. Push the no mar tip on to
the tool inserting the opening of the no mar tip
on to the wire nose.
All manuals and user guides at all-guides.com

Accessories

-15-