Protecting The Environment; Technical Data - Black & Decker CS36BSCROTO Mode D'emploi

Maintenance
Your BLACK+DECKER corded/cordless
appliance/tool has been designed to
operate over a long period of time with a
minimum of maintenance. Continuous
satisfactory operation depends upon proper
tool care and regular cleaning. Your charger
does not require any maintenance apart
from regular cleaning.
Warning! Before performing any
maintenance on the tool, switch off and
unplug the tool or remove the battery from
the tool if the tool has separate battery. If
the battery is integral, run the battery
completely down. Unplug the charger
before cleaning it.
• Regularly clean the ventilation slots in
your tool and charger using a soft brush
or dry cloth.
• Regularly clean the motor housing using
a damp cloth. Do not use any abrasive or
solvent-based cleaner.
• Regularly open the chuck and tap it to
remove any dust from the interior (when
fitted).

Protecting the environment

Separate collection. This product
must not be disposed of with normal
household waste.
Should you find one day that your
BLACK+DECKER product needs replace-
ment, or if it is of no further use to you, do
not dispose of it with household waste.
Make this product available for separate
collection.
Separate collection of used products
and packaging allows materials to be
recycled and used again. Reuse of
recycled materials helps prevent environ-
mental pollution and reduces the demand
for raw materials.
Local regulations may provide for separate
collection of electrical products from the
household, at municipal waste sites or by
All manuals and user guides at all-guides.com
(Original instructions)
the retailer when you purchase a new
product.
BLACK+DECKER provides a facility for the
collection and recycling of BLACK+DECKER
products once they have reached the end of
their working life. To take advantage of this
service please return your product to any
authorised repair agent who will collect
them on our behalf.
You can check the location of your nearest
authorised repair agent by contacting your
local BLACK+DECKER office at the address
indicated in this manual. Alternatively, a list
of authorised BLACK+DECKER repair agents
and full details of our after-sales service and
contacts are available on the Internet at:
www.2helpU.com.

Technical data

Voltage
No-load speed
Hard stall torque
Max. torque
Bit holder
Weight
Battery
Voltage
Battery
Capacity
Charger
Input voltage
Output voltage
Current
Approx. charging time h
Weight
ENGLISH
CS36BSCROTO
V 3.6
DC
min -1 180 rpm
Nm 5.84Nm
m 5.5Nm
mm 6.35
kg 0.42
V 3.6
type Li-Ion
Ah 1.5
V 220-240
AC
V 3.6
DC
mA 150
10
kg 0.06
9