Introduction / Product Package - Beta 1760PT Mode D'emploi

References marked on tester or in instruction
manual:

1. Introduction / Product Package

The voltage tester 1760PT is universally applicable
testers for voltage testing, continuity testing and rotary
field testing.
The tester is constructed according to the latest safety regulations
and guarantee safe and reliable working.
1760PT:
• Designed to meet international safety standards
• Measurement Category (CAT.) IV 600V
• AC and DC voltage test up to 690V with LEDs
• Polarity indication
• Single-pole phase test
• Phase rotation test
• Continuity test
• Auto-power ON / OFF
• Torch light
• IP64 (IEC60529)
1760PT.indd 3
Introduction / Product package
Warning of a potential danger, comply with instruction
manual.
Reference. Please pay utmost attention.
Caution! Dangerous voltage. Danger of electrical shock.
Continuous double or reinforced insulation complies with
category II DIN EN 61140.
Conformity symbol, the instrument complies with the valid
directives. It complies with the EMV-Directive (2014/30/
EU), Standard EN 61326-1 are fulfilled. It also complies
with the Low Voltage Directive (2014/35/EU), Standard
IEC 61243.3:2014 is fulfilled.
Tester complies with the standard (2012/19/EU) WEEE
The instruction manual contains information and referenc-
es, necessary for safe operation and maintenance of the
tester.
Prior to using the tester (commissioning/assembly) the
user is kindly requested to thoroughly read the instruction
manual and comply with it in all sections.
Failure to read the tester manual or to comply with the
warnings and references contained herein can result in
serious bodily injury or tester damage.
The respective accident prevention regulations established
by the professional associations are to be strictly enforced
at all times
IEC 61243-3:2014
3
17/07/17 11:28