GE Spacemaker DSXH43 Manuel De L'utilisateur Et D'installation page 3

PROPER INSTALLATION
This dryer must be properly installed and located in accordance with the Installation Instructions
before it is used.
I Properly ground dryer to conform with all
governing codes and ordinances. Follow
details in Installation Instructions.
I Install or store where it will not be exposed to
temperatures below freezing or exposed to the
weather.
I Connect to a properly rated, protected and
sized power supply circuit to avoid electrical
overload.
I Remove all sharp packing items and dispose of
all shipping materials properly.
Exhaust/Ducting:
This dryer MUST be exhausted to the outside.
1
Use only rigid metal 4" diameter ductwork
2
inside the dryer cabinet. Use only rigid metal
or flexible metal 4" diameter ductwork for
exhausting to the outside. USE OF PLASTIC OR
OTHER COMBUSTIBLE DUCTWORK CAN CAUSE
A FIRE. PUNCTURED DUCTWORK CAN CAUSE A
FIRE IF IT COLLAPSES OR BECOMES
OTHERWISE RESTRICTED IN USE OR DURING
INSTALLATION.
For complete details, follow the Installation
Instructions.
3