Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Location of parts
1.
Speaker
2.
Dial scale
3.
CD door
4.
Headphone Jack
5.
AM / FM / CD switch
6.
Tuning control radio
7.
Loudness on / off
8.
On / off / volume
9.
CD arm
10. LED display
11. CD repeat indicator
Power source
Unwind the AC-power cord (22) and connect to 230V 50Hz power outlet
Antenna
For FM reception, unwind the antenna an place for best reception.
For AM reception turn complete radio because ferritbar is build-in.
Radio operation
1.
Turn the unit on by switching the VOLUME (8) to ON position.
2.
Switch AM/FM/CD (5) to AM or FM
3.
Select soundlevel by turning VOLUME (8)
4.
Select desired broadcasting station with TUNING (6)
5.
Turn off: ON/OFF/VOLUME (8) anticlockwise until "klick"
CD operationg (playback)
1.
Press CD-door (3) to open the disc door.
2.
Switch AM/FM/CD to pos. CD
3.
Insert disc with printed side upwards and release CD-arm (9) downwards
4.
After a few second, total number of track will shown
5.
Press PLAY/PAUSE (16) to start playback
6.
Adjust volumelevel (8)
7.
To stop playback temporalily, press PLAY/PAUSE (16). The play mode indicator will flash.
Press PLAY/PAUSE (16) again to resume playback.
8.
To stop playback, press STOP (17)
Forward skip and backward skip in stop mode
1.
Press FORWARD SKIP (13) or BACKWARD SKIP (14) to select a desired track
2.
Press PLAYPAUSE (16) to start playback at desired track
Search forward and backward during playback
1.
Press FORWARD (13) or BACKWARD (14) and keep pressed to search a desired point of
track
2.
Release buttons at the desired point, playback will resume accordingly.
All manuals and user guides at all-guides.com
GB-1
12. CD Repeat
13. CD skip forward
14. CD skip backwards
15. CD play/pause indicator
16. CD start/pause
17. CD stop
18. CD programme button
19. CD programme indicator
20. Line out jack
21. FM wireantenna
22. Powercord and plug
Publicité
Table des Matières
