auna KR-400 Mode D'emploi page 31

3. Press and hold the Memory/Clock-Adjust button (8) around four second
to enable memory state, the preset station will flash on LCD display.
4. Press Folder/ Pre up/down button (18/20) to select the desired station
memory for storage.
5. Press Memory/Clock-Adjust button (8) to confirm the preset memory.
6. Repeat step 2 to 5 to store other stations.
Recall preset stations
1. Press the Memory/Clock-Adjust button (8) once to enable recall state
2. Press Folder/ Pre up/down button (18/20) to select the desired memory
station.
3. Press Memory/Clock-Adjust button (8) to confirm the recall memory
station.
• The pre-set memories will be cancelled completely if disconnecting
the main power supply and back up battery did not installed. You are
recommended to switch the system into standby mode for convenience
usage.
• There are 3 seconds for program state, after 3 sec. This state would
resume to normal tuner mode automatically.
• You can overwrite a present station by storing another frequency in its
place.
FM-Stereo reception
• Press the " St/Mono " button (19) repeatedly, the FM programs are
receiving in mono and auto mode repeatedly. In particular when stereo
signals are weak, it is preferable to receive the program in Mono.
• If set in auto mode and stereo signal is being received, the apparatus
will play with stereo mode automatically.
Hints for best reception
FM : the receiver work with detachable DAB/FM wire antenna, made sure
the antenna had plugged into the antenna socket (25) and place it on
proper location for the best reception.
EN
31