JVC KD-DV6101 Manuel D'instructions page 60

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Symptoms
• Noise is generated.
• A longer readout time is
required.
• Tracks cannot be played
back as you have intended
them to play.
• Elapsed playing time is not
correct.
• "PLEASE" and "EJECT"
appear alternately on the
display.
• Correct characters are not
displayed (e.g. album name).
• "NO DISC" appears on the
display.
• "NO MAG" appears on
the display.
• "RESET 8" appears on the
display.
• "RESET 1" – "RESET 7"
appears on the display.
• The CD changer does not
work at all.
60
Causes
The track played back is not
an MP3/WMA file (although
it has the extension code
<.mp3> or <.wma>).
Readout time varies due to
the complexity of the folder/
file configuration.
Playback order is determined
when the files are recorded.
This sometimes occurs
during play. This is caused
by how the tracks are
recorded on the disc.
The current disc does not
contain any MP3/WMA
tracks.
This receiver can only
display alphabets (capital:
A – Z), numbers, and a
limited number of symbols.
No disc is in the magazine.
Disc is inserted upside down.
No magazine is loaded in the
CD changer.
This receiver is not
connected to the CD changer
correctly.
The built-in microcomputer
may function incorrectly due
to noise, etc.
Remedies
Skip to another track or
change the disc. (Do not add
the extension code <.mp3>
or <.wma> to non-MP3 or
WMA tracks.)
Do not use too many
hierarchies and folders.
Insert a disc that contains
MP3/WMA tracks.
Insert disc into the magazine.
Insert disc correctly.
Insert the magazine.
Connect this receiver and the
CD changer correctly and
press the reset button of the
CD changer.
Press the reset button of the
CD changer.
Reset the receiver
(see page 2).

Publicité

Table des Matières
loading

Table des Matières