Rose SNEAK+ Manuel D'instructions page 49

5.6 Switching front and rear light on and off
A
B
The front light is integrated into the handlebar and the rear light is integrated into the seat post. Both lights are switched
on and off using the On/Off button on the bicycle's top tube. Proceed as follows to switch the lights on and off:
1. Switch on the e-bike system (see "5.2 Switching the system on/off" on page 48).
2. Press the On/Off button once briefly.
→ The On/Off button starts to flash.
3. Press and hold the On/Off button once.
→ The light is switched on or off.
Both lights are fed by the bike's battery.
B
A
C
C
MAX
MIN
76.0
70.0
MAX/MIN
ANGLE
Part NO.
K-number
ISO-4210
ROHS
CE
SERIAL NO.
49