Ec-Declaration Of Confirmity - Woodster st 10 I2 Traduction Du Manuel D'origine

We herewith declare, Woodster GmbH, Günzburger Str. 69, D-89335 Ichenhausen that the machine described below due to its con struc tion and design and in the version
delivered by us complies with the relevant provisions of the following EC Directives.
In case of a modification of the machine this declara tion ceases to be valid.
Machine description:
Circular saw bench
Machine model:
st 10 l , Art.-Nr. 390 1304 000 / 390 1304 901 / 390 1304 908 / 390 1304 942
2
Relevant EC directives:
EC machine directive 2006/42/EG,
EC Low voltage directive 2006/95/EWG,
EC-EMV directive 2004/108/EWG.
Applied harmonized European Standards:
EN 12100-1, EN 12100-2, EN 13857, EN349, EN418, EN1088, EN60204-1, EN55014, EN60555-2, EN 50082-1, EN60555-3
Applied european Standards:
EN 847-1, EN 13849-1
Applied national technical standards and specifications, especially:
ISO 7960
Notified body within the meaning of Annex VII
TÜV Rheinland
Engaged for
EC design examination
Date
Ichenhausen, 07.07.2009
Signature:
on behalf of Thomas Honigmann (Managing director)
Problem
1. Saw blade releases when the motor
is turned off. s
2. Motor does not start
3. Motor has an incorrect rotational
direction.
4. Motor does not get up to
speed,fuse blows.
5. Burn marks on the cut
76
All manuals and user guides at all-guides.com

EC-declaration of confirmity

Trouble shooting
Possible Cause
Securing nut is not tightened
adequately. angezogen
a) Fuse safety blown
b) Extension cord is defective
c) Connection to the motor or the
switch is defective.
d) Motor or switch is defective.
a) Defective capacitor
b) Incorrect connection
a) Cross cut of the extension
connection is not adequate.
b) Overload due to a dull saw blade.
a) Dull saw blade.
b) Wrong saw blade
, EN 61029-1, EN 61029-2-1, EN 60825-1
Help
Securing nut must be tightened with a
right hand thread.
a) Check the fuse safety.
b) Get a new extension cord
c) Have an electrician check the
machine.
d) Have an electrician check the
machine.
a) Have an electrician check the
machine
b) Let an electrician change the
polarity of the outlet
a) Check the electrical connection.
b) Change the saw blade.
a) Sharpen the saw blade, replace it.
b) Replace the saw blade.