Table des Matières
Publicité
46
All manuals and user guides at all-guides.com
The permissible values per workstation can also vary from
country to country. This information should nevertheless
enable the user to make a better estimation of dangers
and risks.
Sound level in dB
Operation L
= 112,4 dB(A)
WA
Sound level at the workplace in dB
Operation L
= 102.5 dB(A)
pAeq
A measurement uncertainty allowance K = 4 dB applies
to the mentioned emission values.
Information on dust emission
The dust emission values measured in accordance with
the „principles for testing dust emission" of the commit-
tee of experts of wood are below 2 mg/m3. This means
that the TRK limit for wood dust which is valid in the Fed-
eral Republic of Germany will be permanently kept to if
the machine is connected to a properly working dust ex-
tractor with at least 20 m/s air speed.
In these operating instructions we have marked the places
that have to do with your safety with this sign: m
m Safety notes
• Please pass on safety notes and instructions to all those
who work on the machine.
• The machine must only be used in technically perfect
condition in accordance with its designated use and the
instructions set out in the operating manual, and only
by safety-conscious persons who are fully aware of the
risks involved in operating the machine. Any functional
disorders, especially those affecting the safety of the
machine, should therefore be rectified immediately.
• Only tools which correspond to the European norm, EN
847-1, may be used.
• Observe all safety instructions and warnings attached
to the machine.
• See to it that safety instructions and warnings attached
to the machine are always complete and perfectly leg-
ible.
• Caution when working: There is a danger to fingers and
hands from the rotating cutting tool.
• Make sure that the machine stands stable on firm
ground.
• Check all power supply lines. Do not use defective
Use hearing or ear protection.
Use protective mask and
goggles.
Use eye protection.
Publicité
Table des Matières
