Woodster st 10 I2 Traduction Du Manuel D'origine page 54

54
All manuals and user guides at all-guides.com
machining of wood and materials similar to wood. Only
original Woodster tools and accessories may be used.
Use the required sawblade in accordance with the EN
847-1 norm depending on the type of cut and type
of wood (solid wood, plywood or chipboard). Please
observe the „Special Tool Accessories".
• The machine must only be used in technically perfect
condition in accordance with its designated use and
the instructions set out in the operating manual, and
only by safety-conscious persons who are fully aware
of the risks involved in operating the machine. Any
functional disorders, especially those affecting the
safety of the machine, should therefore be rectified
immediately.
• Relevant accident prevention regulations and other,
generally recognized safety-technical rules must also
be adhered to.
• The Woodster machine may only be used, maintained,
and operated by persons familiar with it and instructed
in its operation and procedures. Arbitrary alterations
to the machine release the manufacturer from all re-
sponsibility for any resulting damages.
• The Woodster machine may only be used with original
accessories and original tools made by the manufac-
turer.
• Any other use exceeds authorization. The manufacturer
is not responsible for any damages resulting from un-
authorized use; risk is the sole responsibility of the
operator.