IWC Schaffhausen 4590 Mode D'emploi page 19

and adjusted in stages to the desired length. When closing the locking lever, please ensure that
the stop pins engage in the lower notches (2) on the bracelet.
Important: Always ensure that the locking lever on the clamp fastener is firmly closed to prevent
the bracelet from slipping out unintentionally.
PORTOFINO AUTOMATIC MOON PHASE 37/PORTOFINO AUTOMATIC MOON PHASE 40
SIZING THE MIL ANAISE MESH BR ACELET
Lay the bracelet with its top surface on a firm base with the clasp
fully open. Located beneath the outer side of the clasp is the clamp
fastener that holds the bracelet in pos ition. The locking lever on the
clamp fastener (1) can be opened simply by inserting the special tool
supplied with the watch into one of the two boreholes and lifting the
locking lever. After opening, the locking lever should form a right angle
to the bracelet. The bracelet can now be moved easily inside the clasp
A metal loop (3) is available to secure the loose end of the bracelet in
position. This is infinitely adjustable and can be moved effortlessly to
the desired position.
— 1 9 —