Electrolux ICON Guide D'utilisation Et D'entretien page 16

16 Maintenance
Removing and installing the
grille:
• Loosen the two Phillips head screws,
one at each end of the grill. It is not
necessary to remove them.
• With the drawer open raise up on the
end of the grille opposite the hinges
and pull toward you to remove the
screw from the keyhole slot in the
grille.
• Then pull the grille to the side to
remove the grille.
Installation is the opposite of removal.
Be sure to tighten the two Phillips head
screws.
Access to the phillips head screws is
through the top end slots in the front
of the grille
Screw slot
in grille
Service data sheet location:
The service data sheet is included in
a clear pouch taped to the bck of the
cabinet.
Rear of grille
Keyhole slot
in grille
If Service is Required:
• If the product is within the first year
warranty period please contact your
dealer or call Electrolux Customer
Service at 877.435.3287 for
directions on how to obtain warranty
coverage in your area.
• If the product is outside the first
year warranty period, Electrolux
Customer Service can provide
recommendations of service centers
in your area.
• In all correspondence regarding
service, be sure to give the model
number, serial number, and proof of
purchase.
• Try to have information or description
of nature of the problem, how long
the appliance has been running, the
room temperature, and any additional
information that may be helpful in
quickly solving the problem.