Dell OptiPlex GX280 Guide De Référence Rapide page 11

Small Mini-Tower Computer — Front-Panel Door and Hinge Arms
To prevent damage to your computer, the front-panel door is designed to "break away" if it is lifted
up or pushed down too far.
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
To reattach the front-panel door:
To reattach the hinge arms, first remove the front-panel door by gently snapping it off the two
hinge arms:
1. Use your fingers
to pull here to
remove the front-
panel insert.
1. Lower the two hinge
arms to the vertical.
position
2. Align the two clips on
the front-panel door with
the hinge arms, and
press inward.
2. Lift both
hinge arms to
a horizontal
position.
3. Look through the two view
slots and align the pivot bar
with the two pivot-bar slots.
pivot bar
pivot-bar slot
Quick Reference Guide
11