Makita PM7650H Manuel D'instructions page 18

2) Put the mist blower on a flat surface.
3) Before filling the solution tank, be sure to close the solution discharge lever (2).
4)-1 For Brazil:
The solution tank is capable of 15 liters of solution.
When the tank is full, the total weight including solution is nearly 30 kg. Adjust
the solution pouring volume so that the mist blower with solution in tank does
not overweigh and can be within an operator's strength.
When the total product weight of 25 kg or less after filling is needed, use the
level line on the side of the solution tank at or below 10 l as a guideline.
4)-2 For countries other than Brazil:
The solution tank is capable of 15 liters of solution.
When the tank is full, the total weight including solution is nearly 30 kg.
Adjust the solution pouring volume so that the mist blower with solution in tank
is not overweighted and can be within an operator's strength.
When 10 liters of solution is poured (that is, when the poured solution level
points 10 l marking on the side of the tank), the total product weight is nearly
25 kg.
4)-3 Use the solution level in the tube on the side of the mist blower as a guideline
to check the solution level in the solution tank.
5. Solution mixing function
The solution mixing device inside the solution tank allows solution to be mixed with
air bubbles coming out of it during spraying operation.
All manuals and user guides at all-guides.com
18
(2)