How To Use - Panasonic EH-XC10 Manuel

How to use

• Make sure the warming makeup removal plate is not cracked or
dirty before use.
• The appliance will not operate when connected to the AC
adaptor. The AC adaptor is used only for charging the appliance.
Warm makeup removal
The warming makeup removal plate loosens and easily removes
makeup.
1
1
Press the warming makeup removal switch and
select the desired temperature.
Warming makeup removal plate temperature options
Low ( ): approx. 43 °C (109 °F)
High ( ): approx. 48 °C (118 °F)
• Pressing the warming makeup removal switch cycles
through the "Power OFF"
options.
• The temperature is always set to "Low ( )" when the power
is turned on.
• It is recommended to use the appliance at the "Low ( )"
setting when fi rst beginning use.
Notes
• The warming makeup removal mode indicator fl ashes
while warming up.
• It takes approximately 30 seconds for the appliance to
reach its usable temperature. (Assuming a room
temperature of 25 °C (75 °F))
• The warming makeup removal plate temperature varies
depending on the usage environment.
• Recommended ambient temperature for operation is
15 – 35 °C (59 - 95 °F). The appliance may not warm
properly if used in environments outside the recommended
temperature range.
12
EH-XC10_AM.indb 12
All manuals and user guides at all-guides.com
"Low ( )" "High (
)"
2
2
Apply makeup remover to your forehead, chin,
and both cheeks.
• You can also use the appliance with makeup remover
applied directly to the warming makeup removal plate.
3
3
Once the warming makeup removal mode
indicator starts glowing, apply the warming
makeup removal plate to your skin and begin to
move it around your face.
• Lightly apply the warming makeup
removal plate to your skin and glide
around your face in a circular motion
from the inside out.
Leave areas with heavy makeup
such as around eyes as the last step
to prevent the makeup from
spreading.
Be particularly gentle when using the
appliance around the eyes.
Do not try to force the warming
makeup removal plate into hard-to-
reach areas. Use your hands to
apply makeup remover to these
areas.
4
4
After the makeup remover has loosened the
makeup, press the warming makeup removal
switch to turn off the power.
• Make sure to clean the appliance with a tissue or wash
with water after every use. (See page 15.)
• The appliance will turn off automatically approximately
3 minutes after the warming makeup removal mode
indicator begins glowing.
2015/07/21 18:02:24