Error Messages - Rex-royal S500 Mode D'emploi

Error messages

What are error messages
Error messages indicate an exceptional state (error) or a malfunction in the coffee machine. The display will indicate
which part of the machine is causing the problem.
Handling error messages
Switch the machine off at the mains and wait about 1 minute before switching it back on again. Try to start a product
again. If the attempt is successful, you can continue to use the machine in the normal way. If it is not successful, jot
down the error message, switch the machine off and contact Customer Service.
BP Piston Overcurrent
The current to the piston is too high.
Water piston error
There is a malfunction in the piston unit.
CP Piston Overcurrent
The current to the piston is too high.
Coffee piston error
Fault of coffee piston or the brewing unit.
Boiler Fill Error
The tea/steam boiler could not be refilled (in the time set).
Flowmeter Error
If the water flow cannot be measured, this error message will appear.
Fuse Error
Fuse on main board is defect.
Interface Error
If the coffee machine is operated with a payment system, this message will appear when
the interface has no connection to the c.m.
Sensor 1 Error
The temperature sensor on the coffee boiler cannot be read correctly.
Sensor 2 Error
The temperature sensor on the tea/steam boiler cannot be read correctly.
Operating Instructions - S500
All manuals and user guides at all-guides.com
01 BP Piston
Overcurrent
01 Water
Piston Error
01 CP Piston
Overcurrent
01 Coffee
Pisten Error
01 Boiler
Fill Error
01 Flowmeter
Error
01 Fuse
Error
01 Interface
Error
01 Sensor 1
Error
01 Sensor 2
Error
71