visomat comfort III Mode D'emploi page 51

Appendix
• EN 60601-1: 1990
+ A1: 1993
+ A2: 1995
1. Medical electrical devices
2. General commitment to safety
• IEC 60601-1-2: 2001 +A1:2004
Medical electric devices
Electromagnetic compatibility
• This product conforms to Council Directive
93/42/EEC of 14 June 1993 on Medical Devices.
Manufacturer:
UEBE Medical GmbH
Zum Ottersberg 9
97877 Wertheim
Germany
Important:
No modifications, e.g. opening the device (except to
change the batteries), may be made to this device
without the manufacturer's prior permission.
All manuals and user guides at all-guides.com
Metrological inspection
(previously calibration)
Generally, a metrological inspection is to be recom-
mended at intervals of 2 years. Specialist and profes-
sional operators are referred to the relevant directives
applicable in their individual countries. The inspection
can be performed either by UEBE Medcial GmbH,
an authority responsible for metrology or authorised
maintenance service centres.
Competent authorities and authorised maintenance
service centres can obtain a «Test Procedure for
Metrological Inspections» from the manufacturer on
request.
G
GB-51