Operating Sequence - GOWEIL MS 100 Manuel D'utilisation

Knife sharpener MS 100
Operation
Information
Starting torque
Changing
knifes
Grinding
surface
6.8.1

6.8.1 Operating sequence

22
All manuals and user guides at all-guides.com
ATTENTION! ATTENTION!
Get to know all elements of the knife sharpener and read the operating manual Get to know all elements of the
carefully before placing the machine in operation! carefully before placing the machine in operation!
ATTENTION! ATTENTION!
Great starting torque of the Great starting torque of the electric motor. Therefore, hold on to the operating handle
when turning the machine on. when turning the machine on.
ATTENTION! ATTENTION!
Knive s must not be changed unless the cup grinding wheel is at a standstill. s must not be changed unless the cup grinding wheel is at a standstill. s must not be changed unless the cup grinding wheel is at a standstill.
ATTENTION! ATTENTION!
Never touch the ground surface when the grinding process is complete as it is very Never touch the ground
sharp and hot! GREAT RISK OF INJURY! sharp and hot! GREAT RISK OF INJURY!
Follow this sequence when sharpening different Follow this sequence when sharpening different knives:
. Also make sure that the curved Also make sure that the curved knife is securely clamped into the horizontal clamping
device and rests safely against the end stop bolts. device and rests safely against the end stop bolts.
1. Position and securely clamp the curved knife. See page 19 , item 6.4 "Positioning the curved Position and securely clamp the curved
knives."
. Also make sure that the curved Also make sure that the curved knife is securely clamped into the horizontal clamping
device and rests safely against the end stop bolts. device and rests safely against the end stop bolts.
2. Use the green switch (I) on the emergency stop button to turn the motor on while Use the green switch (I) on the emergency stop button to turn the motor on while Use the green switch (I) on the emergency stop button to turn the motor on while holding on
to the operating handle . to the operating handle
3. Grind the curved knife using regular right-left movements! Grind the curved
ATTENTION!
Do not apply too much grinding pressure! Using too much grinding Do not apply too much grinding pressure! Using too much grinding
pressure will decrease the grade of the knife (blue coloration of the
grinding surface).
Watch out for flying sparks!
4. Repeat the grinding process until the knife is fully sharpened! Repeat the grinding process until the
5. Switch the electric motor off, wait until the cup grinding wheel has come to a standstill, remove Switch the electric motor off, wait until the cup grinding wheel has come to a standstill, remove Switch the electric motor off, wait until the cup grinding wheel has come to a standstill, remove
the curved knife knife and clamp in the next knife to be sharpened following the instructions on
19 , item 6.4 "Positioning curved , item 6.4 "Positioning curved knifes".
sharpener and read the operating manual
electric motor. Therefore, hold on to the operating handle
surface when the grinding process is complete as it is very
is securely clamped into the horizontal clamping
, item 6.4 "Positioning the curved
is securely clamped into the horizontal clamping
to be sharpened following the instructions on page
(blue coloration of the
10.03.2009