Blade Replacement; Service Intervals - diversey TASKI swingo 455B Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 115
Service, maintenance and care
The maintenance of the machine is a prerequisite for impeccable op-
eration and a long service life.
Caution:
Use original TASKI parts only; otherwise, any war-
ranty and liability claims will expire.
Notice:
In order to rule out unintended machine functions,
before starting maintenance works the following
must always be carried out
- - the machine must be switched off,
Legend:
◊ = whenever cleaning is completed, ◊◊ = every week,
◊◊◊ = every month, ⊗ = service lamp
Activity
Loading batteries
Replenishing distilled water (wet-cell
batteries). Observe the service sheet of
the battery supplier!
Draining and cleaning the recovery and
fresh water tanks
Clean all yellow marked parts
Clean the brushes
Clean the suction nozzle / squeegee,
check the blades for wear and change
them if necessary
Wipe the machine using a damp cloth
Clean the gasket of the tank cover,
check for cracks and replace it if neces-
sary
Maintenance and service program car-
ried out by Diversey service techni-
cians

Service intervals

TASKI machines are high-quality machines that have been checked
for safety in the factory and by authorized inspectors. Electrical and
mechanical parts are subject to wear and aging after a longer period
of use.
• In order to maintain operational safe-
ty and readiness for use, the ma-
chine must be serviced whenever the
maintenance indicator lights up (fac-
tory setting is 450 working hours) or
at least once a year.
Notice:
In case of extraordinary use and/or insufficient
maintenance, shorter intervals are required.
Service center
Please always indicate the type and number of the machine whenev-
er you contact us for order placing or in case of malfunctions.
The required data are provided on the nameplate of your machine.
The address of your closest TASKI service partner is provided on the
last page of these instructions of use.
68

Blade replacement

• Unscrew the star knobs (1), pull the blade body (2) out of
the squeegee body and remove the blades (3).
62
• Now you can turn the blades or replace them.
• Put the blade body (2) back in the squeegee body and
screw the star knobs (1) back on.
62
66
67
66
67
1
2
3

Publicité

Table des Matières
loading

Table des Matières