Setting The Clock Functions; Heat + Hold - AEG B 890905 Notice D'utilisation

SYMBOL
• If you set a clock function, the symbol flashes for approximately 5 seconds. In these 5
seconds, touch
• If you set the time, the symbol continues to flash for approximately 5 seconds. After
these 5 seconds, the symbol comes on. The time starts to count down.
• If you do not set one of the clock functions MINUTE MINDER
, the display shows the duration of the oven function.
If you use the clock functions DURATION
heating elements when 90% of the time is completed. The appliance uses the residual heat
to continue the cooking process until the time is completed (3-20 minutes).

Setting the clock functions

1. Use again and again until the display shows the necessary clock function and the
related symbol, for example MINUTE MINDER
2. Use or
You can hear an acoustic signal for 2 minutes when the time is completed. The appliance
switches off.
"00.00" and the related function indicator flash.
3. Use any button to switch off the acoustic signal.
With MINUTE MINDER
With DURATION
With DURATION
then you can set the clock function.
After and
You can only change the TIME OF DAY if :
• none of the clock functions DURATION and END are set;
• no oven function is set.

HEAT + HOLD

HEAT + HOLD function keeps prepared food warm for 30 minutes when the baking process
or roasting process is completed.
The set temperature must be more than 80 °C.
1. Set the oven function and temperature.
2. Touch
3. Touch
HEAT + HOLD function is switched on.
At the end of the cooking time, HEAT + HOLD function starts.
All manuals and user guides at all-guides.com
FUNCTION
END
TIME OF DAY
or to set the time.
to set the necessary time.
the oven must be switched on to set the clock function.
and END the oven switches off automatically.
and END you must set the oven function and the temperature first,
used at the same time, the display shows PROGRAMMED .
again and again until HEAT + HOLD flashes.
to confirm 30 minutes of HEAT + HOLD .
To set the switch-off time for an oven function.
You can use DURATION and END at the same time, if the
appliance is to be switched on and off automatically later.
To set, change or control the time of day.
and END
.
Daily use
DESCRIPTION
, DURATION
, the appliance switches off the
17
or END