Table Des Matières; Specified Use; General Safety Instructions - Metabo W 8-115 Mode D'emploi

17026938_1009 kl WS W 8_115 ff NAFTA Protect.book Seite 5 Mittwoch, 21. Oktober 2009 4:34 16
Operating Instructions
Dear Customer,
Thank you for the trust you have placed in us by buying a Metabo power tool. Each Metabo power tool
is carefully tested and subject to strict quality controls by Metabo's quality assurance. Nevertheless, the
service life of a power tool depends to a great extent on you. Please observe the information contained
in these instructions and the enclosed documentation. The more carefully you treat your Metabo power
tool, the longer it will provide dependable service.
Contents
1 Specified Use
2 General Safety Instructions
3 Special Safety Instructions
4 Overview
5 Special Product Features
6 Commissioning
7 Attaching the Grinding Wheel
8 Use
9 Cleaning
10 Troubleshooting
11 Accessories
12 Repairs
13 Environmental Protection
14 Technical Specifications

1 Specified Use

Machines fitted with original Metabo accessories
are suitable for grinding, sanding, separating and
wire brushing metal, concrete, stone and similar
materials without the use of water.
The user bears sole responsibility for damage
caused by improper use.
Generally accepted accident prevention regula-
tions and the enclosed safety information must be
observed.

2 General Safety Instructions

WARNING - Reading the operating
instructions will reduce the risk of injury.
For your own protection and for the
protection of your power tool pay atten-
tion to all parts of the text that are
marked with this symbol!
General Power Tool Safety Warnings
WARNING Read all safety warnings and
all instructions. Failure to follow the warn-
ings and instructions may result in electric shock,
fire and/or serious injury. Save all warnings and
instructions for future reference! The term
"power tool" in the warnings refers to your mains-
All manuals and user guides at all-guides.com
operated (corded) power tool or battery-operated
(cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered
b) Do not operate power tools in explosive
c) Keep children and bystanders away while
2) Electrical safety
a) Power tool plugs must match the outlet.
b) Avoid body contact with earthed or
c) Do not expose power tools to rain or wet
d) Do not abuse the cord. Never use the cord
e) When operating a power tool outdoors, use
f) If operating a power tool in a damp location
3) Personal safety
a) Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
ENGLISH
or dark areas invite accidents.
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust
or fumes.
operating a power tool. Distractions can
cause you to lose control.
Never modify the plug in any way. Do not
use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of elec-
tric shock.
grounded surfaces, such as pipes, radia-
tors, ranges and refrigerators. There is an
increased risk of electric shock if your body is
earthed or grounded.
conditions. Water entering a power tool will
increase the risk of electric shock.
for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil,
sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric
shock.
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces
the risk of electric shock.
is unavoidable, use a residual current
device (RCD) protected supply. Use of an
RCD reduces the risk of electric shock.
ENG
5