Charge Battery Pack; Inserting The Drive Battery - Carson Desert Warrior XL 2.0 Mode D'emploi

cHarge battery Pack

Beware:
For charging the battery, only use the recommended charger.
Please consider the advice of the enclosed instructions.
Charging procedure:
1 Connect the plug-in charger to wall socket.
(Power LED lights up green)
2 Connect the battery to the charger. (status LED lights up red)
3 Battery is fully charged when the status LED changes to
green.
ATTENTIoN!
never recharge the battery unattended.
InSertIng tHe DrIVe batterIeS
1 To remove the body - swing to open.
2 Insert the battery.
3 Fix it with the mounting brackets.
Advice
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the toy before
being charged.
• Rechargeable batteries are only to be charged under adult
supervision.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the toy.
• The supply terminals are not to be short-circuited.
• Regular examination of transformer or battery charger for any
damage to their cord, plug, enclosure and other parts.
GB // 16